|
|
Post by shpoa on Jan 11, 2006 19:41:36 GMT -5
Hi, I used the search on the forums but I couldn't find out what kind of installation kit is needed to install an aftermarket radio into a 2004 Aveo. I found out that I need a Daewoo wire harness but do I need a Daewoo installation kit too or a GM installation kit? Oh and will the stock speakers sound fine or would i benefit by changing the front speakers with 4" aftermarket speakers? Im looking at about 20 watts rms and 50 watts max on the new radio. Thanks,
Matt
|
|
|
|
Post by crazyblueaveo on Jan 11, 2006 20:32:06 GMT -5
i could not find one for mine neather so i just cut the wires it tells you on the stock radio the diagram. i put my 180 watt kenwood in and both backs are blown and passenger door is blown. replace them all they are junk. why they put junk in like that beats me GM should know better...lol  |
|
|
|
Post by shpoa on Jan 11, 2006 20:59:21 GMT -5
Thanks for the reply but its not the harness that i dont know about, I can get a Daewoo harness for the wires but its the installation kit that mounts the stereo that i dont know about. Thanks,
Matt
|
|
|
|
Post by dragontearz on Jan 11, 2006 23:31:08 GMT -5
I just mounted the new stereo where the old one went, using the old brackets and pocket, and put it back in- cheaper than a kit, but if you want one, Crutchfield has one.
|
|
