|
Post by AveoevA on Sept 1, 2006 0:00:32 GMT -5
Ok so iv'e painted the odometers and the lip of the bubble white. I got the blue LED'S in today and, SUPRISE!!!! the 2 inner lights are not nearly as bright as i want them to be. Also i want to change the parking break lights and the lights for the mile read out, what code do i need.
Thanks, yall have been uber helpful so far.
|
|
aveoike
Premium Unleaded User
4-Sale
Posts: 677
|
Post by aveoike on Sept 1, 2006 1:46:07 GMT -5
I changed my odom and turnsignals to blue. I used the same bulb that HVAC uses. but they were a little tiny so (using a small screwdriver) I bent the tabs in a little and works perfect. Im thinking of doing the low fuel light to red, the E-brake to blue, and the highbeam blue to match (its a lighter blue than the rest). and I put white in the lisence plate lights. but if anyone wants to do that, both lights shines toward the driver side. On the left light, I cut a piece of plastic out to turn it the other direction so they both face inward. If you do this your self you will understand once you actually do it. I didnt take pics of what I cut, sorry.
|
|