mikem
Idle User
Posts: 17
|
Post by mikem on Oct 23, 2006 18:42:43 GMT -5
I have a set of new rota slipstreams, and the front calipers rub on the inside of the wheels. Is there a spacer I can put in there? Are there downsides to running a spacer?
|
|
|
Post by y2daniel1981 on Oct 23, 2006 19:14:41 GMT -5
i found 2 spacers that work with the aveo, 1/8 and 1/4. I got 1/8 because I was having the same problem. You'll probably have to get an alignment
|
|
mikem
Idle User
Posts: 17
|
Post by mikem on Oct 23, 2006 19:34:01 GMT -5
Any ideas where to get them? Are these suitable? Link Are there any that are solid, with only the 4 holes for the lugs? Should I put them front and back? Or just on the front?
|
|
|
Post by y2daniel1981 on Oct 23, 2006 21:00:28 GMT -5
link says invalid item.
You can get rim at any rim and tire shop. I got mine at a local place called Dino's. They werent expensive at all. Only need them for the front
|
|
|
Post by AveoSam on Oct 23, 2006 21:18:45 GMT -5
yea that item is invalid but any 4x100 bolt pattern wheel space should work....get a picture of ur aveo with the slips...i wanted those wheels back when i cared about my car
|
|
mikem
Idle User
Posts: 17
|
Post by mikem on Oct 23, 2006 23:19:29 GMT -5
My tires are backordered until December, so it'll be a bit beforeI can get a picture.. But I'll definitely post some!
|
|
mikem
Idle User
Posts: 17
|
Post by mikem on Oct 26, 2006 19:18:37 GMT -5
Changed my tire choice today, and ordered them. I was going to go with Goodyear Eagle F1 GS-D3's.. but now I'm getting a set of Toyo T1-R's
They will be here in just over a week.
;D
|
|
|
Post by AveoSam on Oct 26, 2006 19:32:14 GMT -5
what size slips did you get? you got lowering springs yet? i recommend getting some next, better look and the car handles good with them
|
|
mikem
Idle User
Posts: 17
|
Post by mikem on Oct 26, 2006 19:35:27 GMT -5
15x7 slipstreams. I probably be getting some lowering springs in the next while.
|
|