vincentvii
Diesel User
Section 9 employee
Posts: 109
|
Post by vincentvii on Jul 12, 2006 21:47:27 GMT -5
I would like to remove my rear "bow tie" emblem but I can't quite figure out how. At first I thought it was stuck to the body (gooped on). I tried the "dental floss to saw through the goop" but it didn't work. It seems to be held on by pegs or pins.
Any advice?
|
|
|
|
Post by y2daniel1981 on Jul 12, 2006 21:55:27 GMT -5
it's both
How to remove rear emblem:
#1 Find a hair drier and warm the badge
#2 While emblem is still warm - Use a thin piece of metal (paint scrapper, knife, something) and carefully slide under the edge of emblem and pry up working your way around
#3 Pull the emblem off
#4 Clean the area
There are two pins with rubber stoppers in the middle so after you pull it off you'll have two holes in your trunk...
|
|
vincentvii
Diesel User
Section 9 employee
Posts: 109
|
Post by vincentvii on Jul 12, 2006 22:04:14 GMT -5
cool! Thanks for the steps.
|
|
|
|
Post by y2daniel1981 on Jul 13, 2006 20:43:13 GMT -5
No problem. For awhile I used the KALOS V badge (with the L over the holes) in the center of the trunk to cover it up
|
|
