Post by genie47 on Oct 11, 2005 10:28:12 GMT -5
For all u bros and sistas who want to have this done... It's a half hour job (if you have the right tools)...
It's easy. First jack ur car up... You have to remove the 4 nuts that hold the panel down in the driver-side front wheel well / bumper. Careful to keep the nuts, and the 2 silver retaining tabs at the bumper (otherwise you won't be able to reattach the 2 9mm nuts. The resonator under the panelling is held down by 3 nuts. Undo those, yank the whole box out and Viola!!! Yes.... you'll have to replace the panelling...
The resonator is basically a plastic U-bend tube that has a large plastic chamber at the bottom of the U-bend. According to something i read a long time ago, the resonator's chamber size is "scientifically calculated" according to the size of the engine, filter element, etc to resonate (or cancel) out most of the induction sounds. Another function of it to to trap leaves!!
... and one more tip... wear shorts and T-shirt, and prepare to sweat a bit!
Car jacked up...
One of the bolts you gotta remove.
Another bolt right over there...
Panel exposed
Congrats it's a boy!!
All this thanks to Maded from www.teamchevysg.com whom I believe is on this board as well. Please note that our cars are RHD.
It's easy. First jack ur car up... You have to remove the 4 nuts that hold the panel down in the driver-side front wheel well / bumper. Careful to keep the nuts, and the 2 silver retaining tabs at the bumper (otherwise you won't be able to reattach the 2 9mm nuts. The resonator under the panelling is held down by 3 nuts. Undo those, yank the whole box out and Viola!!! Yes.... you'll have to replace the panelling...
The resonator is basically a plastic U-bend tube that has a large plastic chamber at the bottom of the U-bend. According to something i read a long time ago, the resonator's chamber size is "scientifically calculated" according to the size of the engine, filter element, etc to resonate (or cancel) out most of the induction sounds. Another function of it to to trap leaves!!
... and one more tip... wear shorts and T-shirt, and prepare to sweat a bit!
Car jacked up...
One of the bolts you gotta remove.
Another bolt right over there...
Panel exposed
Congrats it's a boy!!
All this thanks to Maded from www.teamchevysg.com whom I believe is on this board as well. Please note that our cars are RHD.
