Denis
Race Gas User
"The Other Big D"
Posts: 1,166
|
Post by Denis on Jul 3, 2006 17:25:50 GMT -5
That looks like a dyno plot which could be from an aveo, but how does it have a 7000 RPM redline?!? oh, i wrote that before i looked at the dyno graph, and i was just saying how with the new cams the power band might go on for lil longer, and that we could move up the revlimiter, and how it would be awesome for the car to rev higher.
|
|
Nemasys
Nitrous User
Speed kills, but you get there faster!
Posts: 953
|
Post by Nemasys on Jul 4, 2006 11:34:43 GMT -5
Most stand alone engine management ecu's give you control over the rev limiter i think
|
|
Denis
Race Gas User
"The Other Big D"
Posts: 1,166
|
Post by Denis on Jul 4, 2006 19:40:53 GMT -5
yes they do, but with stock cams it will just be noise, no power gains.
|
|
|
Post by computerkiller on Jul 5, 2006 4:55:34 GMT -5
People listen i was talking to my buddie whos builds hotrods for a long time and told him about the cam issue we have and he said never get cam re grinded he said make the cam weaker and more prone to breaking also when u regrind the stock cam dont have that much to work with and when u regrind it never going to be a good as a new proformace cam i was talking of geting a custom one he said most likey call crane cams and they can make u a custom cams but he said if you want to regrind make sure a professional does it like a cam company he said he wouldnt risk it to a machinest he said cost on a custom cams most likey is 500 a cam but that to any spec u want i rather just not see one of ya break your cams or be disapointed i think u would understand more if he show u a cam and how they regrind and etc how he show me he got a cam from a v8 and pointed out the lift and drations and etc and show me how it all worked and said if your going to throw down 500 might as well do it right
|
|
|
Post by Brian5475E on Jul 5, 2006 17:16:05 GMT -5
Well the place I'm talking about is WEBCAMS in Cali. they do regrinds for Intimidator. They are strickly a cam company
|
|
|
Post by subachad on Jul 6, 2006 10:27:35 GMT -5
Well the place I'm talking about is WEBCAMS in Cali. they do regrinds for Intimidator. They are strickly a cam company Brian, check with this place. They did the cams on my Subaru for $65 per cam, but they already had the profile. Take a look at their process, you'll notice they don't just regrind, they start by adding metal and then reshaping the cams. www.deltacam.com/
|
|
Denis
Race Gas User
"The Other Big D"
Posts: 1,166
|
Post by Denis on Aug 5, 2006 13:53:34 GMT -5
im sorry to bring a dead post back to life, but wore thouse gains only with the cams or with bored cilinder wells also?
|
|
|
Post by Brian5475E on Aug 5, 2006 15:54:01 GMT -5
just cams
|
|
|
Post by AveoSam on Aug 5, 2006 23:25:03 GMT -5
anyone still into getting these?
|
|
Nemasys
Nitrous User
Speed kills, but you get there faster!
Posts: 953
|
Post by Nemasys on Aug 5, 2006 23:57:45 GMT -5
Id like some but too expensive
|
|
|
Post by Brian5475E on Aug 9, 2006 16:29:25 GMT -5
500 a set from webcams. not reall that expensive for cams
|
|
|
Post by kirbycope on Oct 10, 2006 8:28:14 GMT -5
I couldn't load the page. broken link?
|
|
|
Post by AveoSam on Oct 10, 2006 9:51:37 GMT -5
possibly...but you dont really need the intimidator site....one, we have all specs and info right in this thread...second you wouldnt want to by them from intimidator for over a grand plus shipping when u can get them made in the us for 500
|
|