|
Post by Brian5475E on Jun 26, 2006 20:58:02 GMT -5
|
|
|
Post by AveoSam on Jun 26, 2006 21:08:24 GMT -5
sweet deal....they would work with a turbo setup too right?
|
|
|
Post by y2daniel1981 on Jun 26, 2006 22:09:39 GMT -5
email them and find out!
|
|
|
Post by AveoSam on Jun 26, 2006 22:19:29 GMT -5
wow 124 hp would be nice upgrade from 105....we will show those toyota yaris's and honda fits lol
|
|
|
Post by flybanger46 on Jun 26, 2006 22:57:25 GMT -5
Yea, you would definitely feel that extra hp with that.
|
|
Nemasys
Nitrous User
Speed kills, but you get there faster!
Posts: 953
|
Post by Nemasys on Jun 27, 2006 0:24:21 GMT -5
Holy crap, imagine those with CAI, those header Brian installed and a 2.25 inch full exhaust, higher comp. pistons... weeeeeeeeeeeeeeeeeee
|
|
aveosummit
Premium Unleaded User
I am looking for a lot of men who have an infinite capacity to not know what can't be done.-H.FORD
Posts: 723
|
Post by aveosummit on Jun 27, 2006 7:43:18 GMT -5
Can anyone read Korean? So how much for the cam and the bored over short block?
|
|
|
Post by ChevroletRyan on Jun 27, 2006 8:36:47 GMT -5
Looks like the cam will cost just over 200 USD
The Short block will cost around 520 USD
These prices I found on the site and converted them using XE.com
Ryan
|
|
aveosummit
Premium Unleaded User
I am looking for a lot of men who have an infinite capacity to not know what can't be done.-H.FORD
Posts: 723
|
Post by aveosummit on Jun 27, 2006 8:45:54 GMT -5
thanks, so what would be the cost of shipping and how do we order them?
|
|
Nemasys
Nitrous User
Speed kills, but you get there faster!
Posts: 953
|
Post by Nemasys on Jun 27, 2006 11:18:31 GMT -5
That bored tb looks nice too
|
|
|
Post by Brian5475E on Jun 27, 2006 17:22:17 GMT -5
the cams are 1200 USD if you order from Intimidator. unless I convertewd wrong. Because I contacted WebCam today. 550 to regrind your stock cams.
|
|
|
Post by blueaveo4 on Jun 27, 2006 17:37:06 GMT -5
will those cams fit directly in the aveo? or do you have to do something to get them to fit right?
|
|
|
Post by Brian5475E on Jun 27, 2006 17:45:34 GMT -5
Umm did you read my post. Look up!
|
|
|
Post by subachad on Jun 27, 2006 18:20:39 GMT -5
the cams are 1200 USD if you order from Intimidator. unless I convertewd wrong. Because I contacted WebCam today. 550 to regrind your stock cams. Wow that's a little steep for a regrind. If someone got the specs, deltacams in WA would do them for about $65 each. I had them do my Subaru cams, all said and done with shipping came to just under $140. i think the site is deltacams.com or something. Chad
|
|
|
Post by AveoSam on Jun 27, 2006 18:26:28 GMT -5
yea someone get the specs lol so we can do this the cheap way lol but would the webcams company regrind the the cams to the same specs as the cams that can produce 120ish hp? or was the bore out a part of the 120 ish produced?
|
|